Furnace Repair in Bowling Green, KY: Common Winter Breakdowns and What Causes Them

When Your Furnace Stops Working in Winter

When temperatures drop in South Central Kentucky, furnace failures spike. It happens every year. The cold hits, systems that haven’t been stressed in months fire up hard, and weak components finally give out.

Most furnace breakdowns are not random. They follow patterns.

Understanding those patterns helps you know whether you’re dealing with a small issue or a system that’s nearing the end of its life.

The Most Common Furnace Problems We See

1. Ignition System Failures

Modern furnaces use electronic ignition systems instead of standing pilot lights. Ignitors wear out over time. When they fail, the furnace won’t light at all.

This is one of the most common no-heat calls during winter.

2. Dirty or Failing Flame Sensors

A flame sensor verifies that gas has ignited properly. If it gets dirty, the system shuts down as a safety precaution.

Often, this looks like:

• Furnace starts

• Runs briefly

• Shuts off quickly

This issue is common and typically repairable without major component replacement.

3. Airflow Restrictions

Restricted airflow causes overheating. When the furnace overheats, safety switches shut it down.

Common airflow problems include:

• Dirty/Clogged filters

• Blocked returns

• Collapsed ductwork

• Closed supply vents

Airflow is one of the most overlooked causes of heating issues.

4. Blower Motor Problems

If the blower motor fails, the furnace may ignite but won’t distribute warm air.

You may notice:

• Loud humming

• Weak airflow

• Burning smells

• No air movement at vents

Blower repairs vary in cost depending on whether the motor, control module, or both have failed.

5. Control Board or Electrical Issues

Modern furnaces rely heavily on electronic control boards. Power surges, age, and moisture can damage these components.

Electrical issues can cause:

• Intermittent operation

• No response at all

• Random shutdowns

Diagnosis here requires proper testing equipment.

Why Furnace Problems Are Common in Kentucky

Our winters aren’t extreme like northern states, but they fluctuate. We can go from mild weather to freezing temperatures quickly.

That sudden demand increase:

• Stresses ignition systems

• Pushes older motors beyond capacity

• Reveals airflow problems

Systems that were already marginal often fail during the first serious cold snap.

When Is It Just a Repair — And When Is It Replacement Time?

Here’s a practical way to think about it:

Repair Makes Sense If:

• The furnace is under 12-15 years old

• This is the first major issue

• Repair cost is reasonable

• Heat exchanger is intact

Replacement Should Be Considered If:

• The system is over 15-18 years old

• You’ve had multiple recent repairs

• Utility bills keep rising

• The heat exchanger is cracked

• Repair costs approach 30-40% of replacement

Replacing before total failure allows you to make a calm decision instead of an emergency one.

Warning Signs You Shouldn’t Ignore

Call for service immediately if you notice:

• Gas smell

• Burning or electrical odor

• Loud banging during startup

• Frequent system short cycling

• Carbon monoxide detector alerts

These are safety concerns and should not be delayed.

How Preventive Maintenance Reduces Winter Breakdowns

Annual heating maintenance dramatically reduces emergency calls.

A proper tune-up includes:

• Cleaning flame sensor

• Inspecting heat exchanger

• Checking ignition system

• Verifying airflow

• Testing safety switches

• Checking gas pressure

Many furnace failures we see could have been prevented with routine service.

Frequently Asked Questions

How long do furnaces last in Kentucky?

On average gas furnaces last 16 years.

Why does my furnace keep turning on and off?

Short cycling is usually caused by airflow restrictions, overheating, or thermostat problems.

Is it worth fixing a 20-year-old furnace?

Typically no, especially if the repair is significant. Replacement often makes more financial sense.

What causes a furnace to blow cold air?

It may be a thermostat issue, ignition failure, or a blower problem.

Final Thoughts

Furnace repair in Bowling Green doesn’t have to be complicated. Most breakdowns follow predictable patterns.

The key is:

• Diagnosing the real cause

• Addressing airflow

• Knowing when repair makes sense

• Recognizing when replacement is smarter

Waiting rarely improves the situation. Early diagnosis almost always saves money and stress.